FREE CHLORINE SENSORS

The Free Chlorine sensor (Part #H2T0976) is specifically designed for measurement of free chlorine (inorganic) in water with a measurement range of 0 – 10 mg/l (ppm) and a resolution of 0.01 ppm.

Overview

The Free Chlorine sensor (Part #H2T0976) is specifically designed for measurement of free chlorine (inorganic) in water.

FREE CHLORINE SENSOR POWER AND SIGNAL INFORMATION

  • Isolated Analog 4-20mA signal output
  • Power Supply 12 or 24 VDC
  • Digital internal processor

MEASUREMENT RANGE

  • 0PPM-5PPM Resolution in 0.01PPM

TEMPERATURE COMPENSATION

  • Automatic by integral temperature sensor

INTERFERENCES

Do not:

  • Come in physical contact with the membrane or the electrode tip that contacts the membrane
  • Allow a no flow situation for longer than 4 days continuously after polarization
  • Allow exposure to ground current higher than 3 mV for an extended period of time
  • Expose to pressure higher than 116 PSI as it will rupture the membrane
  • Expose to temperatures below 40 Degrees F or higher than 158 degrees F
  • Allow air to be within the membrane cap when filled with electrolyte and in use
  • Allow flow past the probe to be less than 10GPH or higher than 15 GPH as this will damage the probe

INTERFERENCES

  • Amperometric cell for free chlorine (inorganic)

SPECIFICATIONS

Working Range: 0÷10mg/l (0÷10ppm)
Resolution: ±0.01
Analysis System: DPD4
pH Working Range: Compensated
Temperature Working Range: ÷70°C (41÷158°F)
Maximum Pressure: 8 bar (116 PSI)
Power Supply: 4 Wires
Cable: 1.5mt (4.9 ft.)
Probe Holder: PEF1, PEF1/E, PEF5, PEF17
Electrolyte: ELECL