We carry the full Iwaki Air AODD pump series, including:
OVERVIEW
Iwaki Air’s Air Operated Double Diaphragm (AODD) pumps are engineered for maximum utility. They are portable and easy to install, operate, and maintain. Infinitely variable flow rates and variable discharge pressures can handle a large range of fluids, including corrosive chemicals and flammable liquids. The AODD pumps can run dry, self-prime and dead-head without damaging the pump. Other design elements that distinguish Iwaki Air AODD pumps include body stabilization features to ensure heat resistance, and sound suppression construction to reduce both mechanical noise and compressed air noise.
These pumps are built for power. A higher power output means the pump can operate with less applied air pressure compared with many competitor’s pumps – often outperforming pumps that may have a higher listed flow rate.
FEATURES
Looped C-Spool Air Valve
Revolutionary new spring design uses stronger, light-weight material for a smoother stroke with less wear and tear of all spool components (fully interchangeable with C-Spool model pumps).
Lube-free Operation
Clean, environmentally friendly design is engineered without the need for lubrication. Lube-free operation extends the life of all air motor parts
Independent and Modular Pilot Valve
Industry-leading pilot valve system design is fully independent and virtually non-wearing. Static seals are dirt and moisture resistant. Pilot valve and springs are made from high tensile stainless steel that will not bend or rust. Faster cycles with shorter strokes will extend diaphragm life.
Large Diameter Ports
Oversized ports allow air contamination to pass through the pump eliminating blockages and freezing.
Reduced Pump Stalling
The unique new Looped C-Spool greatly reduces the pump stalling
Resists Freezing
Compressed air expands gradually through our innovative staged air chamber exhaust system to reduce freezing. Large air port design allows contaminated air to pass through the pump and out the exhaust.
1/4″ TC-X030 Series
1/4″ TC-X030 Series
OVERVIEW
The TC-X030 Series compact pumps offer minimal flow rates and feature the new Looped C™ Air Motor Technology (patent pending).
Maximum Flow Rate: 2.1 GPM (8.0 LPM)
Maximum Discharge Head: 230 FT (70 m)
Available in: PVDF
Spool Valve type: Looped C-Spring Valve
Certifications: CE, ATEX
SPECIFICATIONS
| Material Code: | VT |
|---|---|
| Max Flow Rate: | 2.1 GPM (8.0 LPM) |
| Max Operating Presure: | 100 PSI (0.7 MPa) |
| Max Air Consumption: | 8.83 scfm (250 L/min) |
| Supply Air Pressure Range: | 30-100 PSI (0.2-0.7 MPa) |
| Liquid Discharge Volume per Cycle: | 0.5 oz (15 ML) |
| Connection Size (Suction x Discharge) | NPT 1/4″ |
| Weight: | 3.7 lbs (1.7 kg) |
| Pump Body Material Code: V-PVDF (Kynar®) |
Diaphragm material options: T-PTFE (Teflon®) |
1/4″ TC-X050 Series
1/4″ TC-X050 Series
OVERVIEW
The TC-X030 Series compact pumps offer minimal flow rates and feature the new Looped C™ Air Motor Technology (patent pending).
Maximum Flow Rate: 2.1 GPM (8.0 LPM)
Maximum Discharge Head: 230 FT (70 m)
Available in: PVDF
Spool Valve type: Looped C-Spring Valve
Certifications: CE, ATEX
SPECIFICATIONS
| Material Code: | VT |
|---|---|
| Max Flow Rate: | 2.1 GPM (8.0 LPM) |
| Max Operating Presure: | 100 PSI (0.7 MPa) |
| Max Air Consumption: | 8.83 scfm (250 L/min) |
| Supply Air Pressure Range: | 30-100 PSI (0.2-0.7 MPa) |
| Liquid Discharge Volume per Cycle: | 0.5 oz (15 ML) |
| Connection Size (Suction x Discharge) | NPT 1/4″ |
| Weight: | 3.7 lbs (1.7 kg) |
| Pump Body Material Code: V-PVDF (Kynar®) |
Diaphragm material options: T-PTFE (Teflon®) |
3/8″ TC-X100/101 Series
3/8” TC-X100/101 Series
OVERVIEW
TC-X100/101 pumps are specially designed for extremely low speed fluid transfer, frequent start/stop and dead head type applications with a choice of multi-port options.
Maximum Flow Rate: 6.1 GPM (23 LPM)
Maximum Discharge Head: 230 FT (70 m)
Available in: Stainless Steel, Aluminum, Glass Fiber Reinforced Polypropylene, Pure Polyrpopylene
Spool Valve type: Spring-less valve
SPECIFICATIONS
Pump Body Material Code:
P-PPG/Pure Poly
A-Aluminum
S-Stainless Steel“X” Diaphragm material options:
T-PTFE (Teflon®)
H-TPEE (Hytrel™)
C-CR (Neoprene ™)
N-NBR (Buna)
S-TPO (Santoprene®)
E-Nordel (EPDM)
| Model: | TC-X 100 | TC-X 101 | |
| Material Code: | P”X” | A”X” | S”X” |
| Max Flow Rate: | 4.8 GPM (18 LPM) | 6.1 GPM (23 LPM) | |
| Max Operating Pressure: | 100 PSI (0.7 MPa) | ||
| Max Air Consumption: | 8.83 scfm (250 L/min) | 10.6 scfm (300 L/min) | |
| Supply Air Pressure Range: | 30 to 100 PSI (0.2 to 0.7 MPa) | ||
| Liquid Discharge Volume per Cycle: | 1.7 oz(50 ML) | ||
| COnnection Size (Suction x Discharge): | NPT 3/8″ | ||
| Weight: | 6.6 lbs (3.0 kg) | 7.7 lbs (3.5 kg) | 11.5 lbs (5.2 kg) |
3/8″ TC-X102 Series
3/8″ TC-X102 Series
OVERVIEW
TC-X102 Series are compact pumps available only in Glass Fiber Reinforced Polypropylene (PPG) and offer a chemically resistant air section.
Maximum Flow Rate: 6.3 GPM (24 LPM)
Maximum Discharge Head: 230 FT (70 m)
Available in : Glass Fiber Reinforced Polypropylene (PPG)
Spool Valve type: C-Spring Valve
SPECIFICATIONS
Pump Body Material Code:
P-Glass Fiber Reinforced Polypropylene (PPG)“X” Diaphragm material options:
T-PTFE (Teflon®)
H-TPEE (Hytrel™)
C-CR (Neoprene ™)
N-NBR (Buna)
S-TPO (Santoprene®)
E-Nordel (EPDM)
| Model: | TC-X 102 |
| Material Code: | P”X” |
| Max Flow Rate: | 6.3 GPM (24 LPM) |
| Max Operating Pressure: | 100 PSI (0.7 MPa) |
| Max Air Consumption: | 14.1 scfm (400 L/min) |
| Supply Air Pressure Range: | 30 to 100 PSI (0.2 to 0.7 MPa) |
| Liquid Discharge Volume per Cycle: | 2.4 oz (70 ML) |
| COnnection Size (Suction x Discharge): | NPT 3/8″ |
| Weight: | 7.7 lbs (3.5 kg) |
1/2″ TC-X150 Series
1/2″ TC-X150 Series
OVERVIEW
The TC-X150 pump is specially designed for frequent start/stop, dead head and high pressure type applications.
Maximum Flow Rate: 7.4 GPM (28 LPM)
Maximum Discharge Head: 230 FT (70 m)
Available in: Glass Fiber Reinforced Polypropylene (PPG), Polyoxymethylene (POM)
Spool Valve type: Spring-less Spool
Check Valve Type: Flat Valve or Ball Valve
SPECIFICATIONS
Pump Body Material Code:
P-Glass Fiber Reinforced Polypropylene (PPG)
D-Polypropylene (Acetal)“X” Diaphragm material options:
T-PTFE (Teflon®)
H-TPEE (Hytrel™)
C-CR (Neoprene ™)
N-NBR (Buna)
S-TPO (Santoprene®)
E-EPDM (Nordel)
| Material Code: | P”X” | DT |
| Max Flow Rate: | 7.4 GPM (28 LPM) | |
| Max Operating Pressure: | 100 PSI (0.7 MPa) | |
| Max Air Consumption: | 10.6 scfm (300 L/min) | |
| Supply Air Pressure Range: | 30 to 100 PSI (0.2 to 0.7 MPa) | |
| Liquid Discharge Volume per Cycle: | 1.7 oz (50 ML) | |
| Connection Size (Suction x Discharge): | NPT 1/2″ | |
| Weight: | 7.7 lbs (3.5 kg) | |
1/2″ TC-X151 Series
1/2″ TC-X151 Series
OVERVIEW
The TC-X151 pump is specially designed for frequent start/stop, dead head and high pressure type applications.
Maximum Flow Rate: 14.3 GPM (54 LPM)
Maximum Discharge Head: 230 FT (70 m)
Available in: PVDF, Glass Fiber Reinforced Polypropylene, Polyoxymethylene (POM), Aluminum, Stainless Steel
Spool Valve type: C-Spring, Flat Valve
SPECIFICATIONS
Pump Body Material Code:
P-Glass Fiber Reinforced Polypropylene (PPG)
A-Aluminum
S-Stainless Steel
V-PVDF (Kynar®)
D-Polypropylene (Acetal)“X” Diaphragm material options:
T-PTFE (Teflon®)
H-TPEE (Hytrel™)
C-CR (Neoprene™)
N-NBR (Buna)
S-TPO (Santoprene®)
E-EPDM (Nordel)
| Material Code: | A”X” | S”X” | P”X” | V”X” | DT |
| Max Flow Rate: | 14.3 GPM (54 LPM) | 13.2 GPM (50 LPM) | |||
| Max Operating Pressure: | 100 PSI (0.7 MPa) | ||||
| Max Air Consumption: | 15.9 scfm (450 LPM) | 14.1 scfm (400 LPM) | |||
| Supply Air Pressure Range: | 30 to 100 PSI (0.2 to 0.7 MPa) | ||||
| Liquid Discharge Volume per Cycle: | 2.4 oz (70 ML) | ||||
| Connection Size (Suction x Discharge): | NPT 1/2″ | ||||
| Weight: | 9.0 lbs (4.1 kg) | 13.9 lbs (6.3 kg) | 7.7 lbs (3.5 kg) | 9.5 lbs (4.3 kg) | 7.7 lbs (3.5 kg) |
TC-X152 Series
1/2″ TC-X152 Series
OVERVIEW
The TC-X152 pump is designed to offer exceptional flow rates, high chemical resistance, improved leak prevention and increased reliability. The TC-X152 series offer excellent flow rates, low air consumption and solids handling capabilities. Featuring new Looped C™ Air Motor Technology (patent pending).
Maximum Flow Rate: 15.8 GPM (60 LPM)
Maximum Discharge Head: 230 FT (70 m)
Available in: Stainless Steel, Aluminum, Pure Polypropylene & PVDF
Spool Valve type: C-Spring valve
SPECIFICATIONS
Pump Body Material Code:
P-PPG/Pure Poly
A-Aluminum
S-Stainless Steel
V-PVDF (Kynar®)
D-Polypropylene (Acetal)“X” Diaphragm material options:
T-PTFE (Teflon®)
H-TPEE (Hytrel™)
C-CR (Neoprene™)
N-NBR (Buna)
S-TPO (Santoprene®)
E-EPDM (Nordel)
| Material Code: | A”X” | S”X” | P”X”-PP | V”X” | DT |
| Max Flow Rate: | 15.8 GPM (60 LPM) | 14.8 GPM (56 LPM) | |||
| Max Operating Pressure: | 100 PSI (0.7 MPa) | ||||
| Max Air Consumption: | 31.8 scfm (900 L/min) | ||||
| Supply Air Pressure Range: | 30 to 100 PSI (0.2 to 0.7 MPa) | ||||
| Liquid Discharge Volume per Cycle: | 2.9 oz (85 ML) | ||||
| Connection Size (Suction x Discharge): | NPT 1/2″ | ||||
| Weight: | 9.0 lbs (4.1 kg) | 14.8 lbs (6.7 kg) | 6.8 lbs (3.1 kg) | 9.3 lbs (4.2 kg) | 8.4 lbs (3.8 kg) |
3/4″ TC-X202 Series
3/4″ TC-X202 Series
OVERVIEW
TC-X202 3/4″ pumps are available in Glass Fiber Reinforced Polypropylene (PPG) with a PPG air motor section for excpetional chemical resistance. Featuring new Looped C™ Air Motor technology (patent pending). Both flange and threaded connections available.
Maximum Flow Rate:31.7 GPM (120 LPM)
Maximum Discharge Head: 230 FT (70 m)
Available in: Glass Fiber Reinforced Polypropylene (PPG) & PVDF
Spool Valve type: C-Spring Valve
SPECIFICATIONS
Pump Body Material Code:
P-Glass Fiber Reinforced Polypropylene (PPG)“X” Diaphragm material options:
T-PTFE (Teflon®)
H-TPEE (Hytrel™)
C-CR (Neoprene™)
N-NBR (Buna)
S-TPO (Santoprene®)
E-EPDM (Nordel)
V-FKM (Viton®)
| Material Code: | P”X” | PT | |||
| Max Flow Rate: | 31.7 GPM (120 LPM) | 26.4 GPM (100 LPM) | |||
| Max Operating Pressure: | 100 PSI (0.7 MPa) | ||||
| Max Air Consumption: | 42.4 scfm (1200 L/min) | 49.4 scfm (1400 L/min) | |||
| Supply Air Pressure Range: | 30 to 100 PSI (0.2 to 0.7 MPa) | ||||
| Liquid Discharge Volume per Cycle: | 12 oz (350 ML) | 8 oz (240 ML) | |||
| Connection Size (Suction x Discharge): | NPT 3/4″ | ||||
| Weight: | 15.4 lbs (7.0 kg) | ||||
1″ TC-X252 Series
1” TC-X252 SERIES
OVERVIEW
TC-X252 pumps are 1″ pumps available in PVDF high chemical resistance. Featuring new Looped C™ Air Motor technology (patent pending). Both flange and threaded connections available.
Maximum Flow Rate:43.6 GPM (165 LPM)
Maximum Discharge Head: 230 FT (70 m)
Available in: Glass Fiber Reinforced Polypropylene & Kynar®
Spool Valve type: C-Spring Valve
SPECIFICATIONS
Pump Body Material Code:
P-Glass Fiber Reinforced Polypropylene (PPG)
V-PVDF (Kynar®)“X” Diaphragm material options:
T-PTFE (Teflon®)
H-TPEE (Hytrel™)
C-CR (Neoprene™)
N-NBR (Buna)
S-TPO (Santoprene®)
V-FKM (Viton®)E-EPDM (Nordel)
| Material Code: | P”X” | V”X” | PT | VT | |
| Max Flow Rate: | 43.6 GPM (165 LPM) | ||||
| Max Operating Pressure: | 100 PSI (0.7 MPa) | ||||
| Max Air Consumption: | 56.5 scfm (1600 L/min) | 63.6 scfm (1800 L/min) | |||
| Supply Air Pressure Range: | 30 to 100 PSI (0.2 to 0.7 MPa) | ||||
| Liquid Discharge Volume per Cycle: | 12 oz (600 ML) | 17 oz (500 ML) | |||
| Connection Size (Suction x Discharge): | NPT 1″ | ANSI 150 lb 1″ JIS 10 K25A DIN 25PN10 |
|||
| Weight: | 24.3 lbs (11 kg) | 29.8 lbs (13.5 kg) | 24.3 lbs (11 kg) | 29.8 lbs (13.5 kg) | |
1″ TC-X 253 Series
1” TC-X 253 SERIES
OVERVIEW
TC-X253 pumps are heavy duty, robust pumps with excellent leak resistance and reliability. They offer exceptional flow rates and solids handling capabilities.
Maximum Flow Rate: 58.1 GPM (220 LPM)
Maximum Discharge Head: 230 FT (70 m)
Maximum Solids Size: 6.5 mm
Available in: Stainless Steel, Aluminum and Castiron
Shuttle Valve type: C-Spring Valve
SPECIFICATIONS
Pump Body Material Code:
A-Aluminum
S-Cast Stainless Steel
F-Fe (Cast Iron)“X” Diaphragm material options:
T-PTFE (Teflon®)
H-TPEE (Hytrel™)
C-CR (Neoprene™)
N-NBR (Buna)
S-TPO (Santoprene®)
V-FKM (Viton®)E-EPDM (Nordel)
| Material Code: | A”X” | S”X” | F”X” | AT | ST | FT |
| Max Flow Rate: | 58.1 GPM (220 LPM) | 50.2 GPM (190 LPM) | ||||
| Max Operating Pressure: | 100 PSI (0.7 MPa) | |||||
| Max Air Consumption: | 70.6 scfm (2000 L/min) | 63.6 scfm (1800 L/min) | ||||
| Supply Air Pressure Range: | 30 to 100 PSI (0.2 to 0.7 MPa) | |||||
| Liquid Discharge Volume per Cycle: | 27 oz (800 ML) | 22 oz (650 ML) | ||||
| Connection Size (Suction x Discharge): | NPT 1″ | |||||
| Weight: | 24.3 lbs (11 kg) | 45.2 lbs (20.5 kg) | 24.3 lbs (11 kg) | 45.2 lbs (20.5 kg) | ||
2″ TC-X500 Series
2” TC-X500 SERIES
OVERVIEW
TC-X500 Series pumps offer excellent flow rates and a new heavy dutyand compact body design. They can operate at variable air pressures and are suited for both start/stop and fully continuous duty pumping applications. They can easily handle high head pressure and long discharge lines.
Maximum Flow Rate: 190.2 GPM (720 LPM)
Maximum Discharge Head: 280 FT (85 m)
Available in: Stainless Steel, Aluminum, Polypropylene & PVDF
Spool Valve type: Coil Spring Air Spool
SPECIFICATIONS
| Material Code: | A”X” (-FL) |
S”X” (-FL) |
F”X” (-FL) |
AT”X” (-FL) |
ST”X” (-FL) |
FT”X” (-FL) |
| Max Flow Rate: | 190.2 GPM (720 LPM) | 132.1 GPM (500 LPM) | ||||
| Max Operating Pressure: | 125 PSI (0.85 MPa) | 100 PSI (0.7 MPa) | ||||
| Max Air Consumption: | 212 scfm (6000 L/min) | 177 scfm (5000 L/min) | ||||
| Supply Air Pressure Range: | 14 to 125 PSI (0.1 to 0.85 MPa) | 22-100 PSI (0.15 – 0.7 MPa) | ||||
| Liquid Discharge Volume per Cycle: | 118 oz (3500 ML) | 44 oz (1300 ML) | ||||
| Connection Size (Suction x Discharge): | NPT 2″ | |||||
| Weight: | 77.2 lbs (35 kg) |
121.3 lbs (55 kg) |
77.2 lbs (35 kg) |
121.3 lbs (55 kg) |
||
| Material Code: | P”X”(-FL) | V”X”(-FL) | PT(-FL) | VT(-FL) | ||
| Max Flow Rate: | 163.8 GPM (620 LPM) | 132.1 GPM (500 LPM) | ||||
| Max Operating Pressure: | 100 PSI (0.7 MPa) | |||||
| Max Air Consumption: | 141.3 scfm (4000 L/min) | 177 scfm (5000 L/min) | ||||
| Supply Air Pressure Range: | 14 to 125 PSI (0.1 to 0.85 MPa) | 22-100 PSI (0.15 – 0.7 MPa) | ||||
| Liquid Discharge Volume per Cycle: | 118 oz (3500 ML) | 68 oz (2000 ML) | ||||
| Connection Size (Suction x Discharge): | ANSI flange 150 lb JIS 10K 50A (DIN 50 PN 10) |
|||||
| Weight: | 83.8 lbs (38 kg) | 98.1 lbs (44.5 kg) | 83.8 lbs (38 kg) | 98.1 lbs (44.5 kg) | ||
| Pump Body Material Code: A-Aluminum S-Stainless Steel F-Fe (Cast Iron) P-Glass Fiber Reinforced Polypropylene (PPG) V-PVDF (Kynar®) |
“X” Diaphragm material options: T-PTFE (Teflon®) H-TPEE (Hytrel™) C-CR (Neoprene™) N-NBR (Buna) S-TPO (Santoprene®) V-FKM (Viton®) E-EPDM (Nordel) |
|||||
About IWAKI AMERICA
Iwaki America Inc. is one of over 25 global centers for the manufacturing and support of Iwaki pumps. Their 50 plus years of pump design engineering has made Iwaki Air a worldwide leader of the best chemical handling equipment used in OEM, Industrial, Chemical Process and Semiconductor applications.
ADDITIONAL RESOURCES
- 1/4″ TC-X030 Series Data Sheet
- 1/4″ TC-X050 Series Data Sheet
- 3/8″ TC-X100/101 Series Data Sheet
- 3/8″ TC-X102 Series Data Sheet
- 1/2″ TC-X150 Series Data Sheet
- 1/2″ TC-X151 Series Data Sheet
- 1/2″ TC-X152 Series Data Sheet
- 3/4″ TC-X202 Series Data Sheet
- 1″ TC-X252 Series Data Sheet
- 1″ TC-X 253 Series Data Sheet
- 2” TC-X500 Series Data Sheet